HD64F2149 Datasheet, PDF (672/1035 Pages) Renesas Technology Corp – Hitachi 16-Bit Single-Chip Microcomputer

20.2.5 Module Stop Control Register (MSTPCR)
MSTPCRH
MSTPCRL
Bit
7654321076543210
MSTP15 MSTP14 MSTP13 MSTP12 MSTP11 MSTP10 MSTP9 MSTP8 MSTP7 MSTP6 MSTP5 MSTP4 MSTP3 MSTP2 MSTP1 MSTP0
Initial value 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MSTPCR, comprising two 8-bit readable/writable registers, performs module stop mode control.
When the MSTP9 bit in MSTPCR is set to 1, A/D converter operation stops at the end of the bus
cycle and a transition is made to module stop mode. Registers cannot be read or written to in
module stop mode. For details, see section 24.5, Module Stop Mode.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in
software standby mode.
MSTPCRH Bit 1—Module Stop (MSTP9): Specifies the A/D converter module stop mode.
MSTPCRH
Bit 1
MSTP9 Description
0
A/D converter module stop mode is cleared
1
A/D converter module stop mode is set
(Initial value)
638