HD64F2149 Datasheet, PDF (204/1035 Pages) Renesas Technology Corp – Hitachi 16-Bit Single-Chip Microcomputer

7.2.9 Module Stop Control Register (MSTPCR)
MSTPCRH
MSTPCRL
Bit
7654321076543210
MSTP15 MSTP14 MSTP13 MSTP12 MSTP11 MSTP10 MSTP9 MSTP8 MSTP7 MSTP6 MSTP5 MSTP4 MSTP3 MSTP2 MSTP1 MSTP0
Initial value 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Read/Write R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MSTPCR, comprising two 8-bit readable/writable registers, performs module stop mode control.
When the MSTP14 bit in MSTPCR is set to 1, the DTC operation stops at the end of the bus cycle
and a transition is made to module stop mode. Note that 1 cannot be written to the MSTP14 bit
when the DTC is being activated. For details, see section 24.5, Module Stop Mode.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in
software standby mode.
MSTPCRH Bit 6—Module Stop (MSTP14): Specifies the DTC module stop mode.
MSTPCRH
Bit 6
MSTP14 Description
0
DTC module stop mode is cleared
1
DTC module stop mode is set
(Initial value)
170