HD64F2149 Datasheet, PDF (448/1035 Pages) Renesas Technology Corp – Hitachi 16-Bit Single-Chip Microcomputer

15.2 Register Descriptions
15.2.1 Receive Shift Register (RSR)
Bit
7
6
5
4
3
2
1
0
Read/Write —
—
—
—
—
—
—
—
RSR is a register used to receive serial data.
The SCI sets serial data input from the RxD pin in RSR in the order received, starting with the
LSB (bit 0), and converts it to parallel data. When one byte of data has been received, it is
transferred to RDR automatically.
RSR cannot be directly read or written to by the CPU.
15.2.2 Receive Data Register (RDR)
Bit
7
6
5
4
3
2
1
0
Initial value
0
0
0
0
0
0
0
0
Read/Write
R
R
R
R
R
R
R
R
RDR is a register that stores received serial data.
When the SCI has received one byte of serial data, it transfers the received serial data from RSR to
RDR where it is stored, and completes the receive operation. After this, RSR is receive-enabled.
Since RSR and RDR function as a double buffer in this way, continuous receive operations can be
performed.
RDR is a read-only register, and cannot be written to by the CPU.
RDR is initialized to H'00 by a reset, and in standby mode, watch mode, subactive mode, subsleep
mode, and module stop mode.
414