HD6417750RF240DV Datasheet, PDF (792/1132 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family / SH7750 Series

Section 16 Serial Communication Interface with FIFO (SCIF)
SH7750, SH7750S, SH7750R Group
Bit 5—Transmit FIFO Data Empty (TDFE): Indicates that data has been transferred from
SCFTDR2 to SCTSR2, the number of data bytes in SCFTDR2 has fallen to or below the transmit
trigger data number set by bits TTRG1 and TTRG0 in the FIFO control register (SCFCR2), and
new transmit data can be written to SCFTDR2.
Bit 5: TDFE
0
Description
A number of transmit data bytes exceeding the transmit trigger set number
have been written to SCFTDR2
[Clearing conditions]
• When transmit data exceeding the transmit trigger set number is written
to SCFTDR2 after reading TDFE = 1, and 0 is written to TDFE
• When transmit data exceeding the transmit trigger set number is written
to SCFTDR2 by the DMAC
1
The number of transmit data bytes in SCFTDR2 does not exceed the
transmit trigger set number
(Initial value)
[Setting conditions]
• Power-on reset or manual reset
• When the number of SCFTDR2 transmit data bytes falls to or below the
transmit trigger set number as the result of a transmit operation*
Note: * As SCFTDR2 is a 16-byte FIFO register, the maximum number of bytes that can be
written when TDFE = 1 is 16 - (transmit trigger set number). Data written in excess of
this will be ignored.
The number of data bytes in SCFTDR2 is indicated by the upper bits of SCFDR2.
Page 740 of 1076
R01UH0456EJ0702 Rev. 7.02
Sep 24, 2013