HD6417750RF240DV Datasheet, PDF (190/1132 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family / SH7750 Series

Section 4 Caches
SH7750, SH7750S, SH7750R Group
31
24 23
Address field _{1 1 1 1 0 0 0 0}
31
Data field
Tag
13 12
Entry
Way
10 9
543210
A
10
V
Legend:
V: Validity bit
A: Association bit
: Reserved bits (0 write value, undefined read value
Figure 4.12 Memory-Mapped IC Address Array
4.6.2 IC Data Array
The IC data array is allocated to addresses H'F100 0000 to H'F1FF FFFF in the P4 area. A data
array access requires a 32-bit address field specification (when reading or writing) and a 32-bit
data field specification. The way and entry to be accessed is specified in the address field, and the
longword data to be written is specified in the data field.
In the address field, bits [31:24] have the value H'F1 indicating the IC data array, the way is
specified by bit [13], and the entry by bits [12:5]. CCR.IIX has no effect on this entry
specification. Address field bits [4:2] are used for the longword data specification in the entry. As
only longword access is used, 0 should be specified for address field bits [1:0].
The data field is used for the longword data specification.
The following two kinds of operation can be used on the IC data array:
1. IC data array read
Longword data is read into the data field from the data specified by the longword specification
bits in the address field in the IC entry corresponding to the way and entry set in the address
field.
2. IC data array write
The longword data specified in the data field is written for the data specified by the longword
specification bits in the address field in the IC entry corresponding to the way and entry set in
the address field.
Page 138 of 1076
R01UH0456EJ0702 Rev. 7.02
Sep 24, 2013