HD6417750RF240DV Datasheet, PDF (368/1132 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family / SH7750 Series

Section 11 Realtime Clock (RTC)
SH7750, SH7750S, SH7750R Group
11.2.2 Second Counter (RSECCNT)
RSECCNT is an 8-bit readable/writable register used as a counter for setting and counting the
BCD-coded second value in the RTC. It counts on the carry (transition of the R64CNT.1Hz bit
from 0 to 1) generated once per second by the 64 Hz counter.
The setting range is decimal 00 to 59. The RTC will not operate normally if any other value is set.
Write processing should be performed after stopping the count with the START bit in RCR2, or
by using the carry flag.
RSECCNT is not initialized by a power-on or manual reset, or in standby mode.
Bit 7 is always read as 0. A write to this bit is invalid, but the write value should always be 0.
Bit: 7
6
5
4
3
2
1
0
—
10-second units
1-second units
Initial value:
0
Undefined Undefined Undefined Undefined Undefined Undefined Undefined
R/W: R
R/W R/W R/W R/W R/W R/W R/W
11.2.3 Minute Counter (RMINCNT)
RMINCNT is an 8-bit readable/writable register used as a counter for setting and counting the
BCD-coded minute value in the RTC. It counts on the carry generated once per minute by the
second counter.
The setting range is decimal 00 to 59. The RTC will not operate normally if any other value is set.
Write processing should be performed after stopping the count with the START bit in RCR2, or
by using the carry flag.
RMINCNT is not initialized by a power-on or manual reset, or in standby mode.
Bit 7 is always read as 0. A write to this bit is invalid, but the write value should always be 0.
Bit: 7
6
5
4
3
2
1
0
—
10-minute units
1-minute units
Initial value:
0
Undefined Undefined Undefined Undefined Undefined Undefined Undefined
R/W: R
R/W R/W R/W R/W R/W R/W R/W
Page 316 of 1076
R01UH0456EJ0702 Rev. 7.02
Sep 24, 2013