82801FB Datasheet, PDF (597/786 Pages) Intel Corporation – Intel I/O Controller Hub 6 (ICH6) Family

AC ’97 Audio Controller Registers (D30:F2)
16.2.2
16.2.3
x_CIV—Current Index Value Register (Audio—D30:F2)
I/O Address:
Default Value:
Lockable:
NABMBAR + 04h (PICIV),
NABMBAR + 14h (POCIV),
NABMBAR + 24h (MCCIV)
MBBAR + 44h (MC2CIV)
MBBAR + 54h (PI2CIV)
MBBAR + 64h (SPCIV)
00h
No
Attribute:
Size:
Power Well:
RO
8 bits
Core
Software can read the registers at offsets 04h, 05h and 06h simultaneously by performing a single,
32-bit read from address offset 04h. Software can also read this register individually by doing a
single, 8-bit read to offset 04h.
Bit
Description
7:5 Hardwired to 0
Current Index Value [4:0] — RO. These bits represent which buffer descriptor within the list of 32
4:0 descriptors is currently being processed. As each descriptor is processed, this value is incremented.
The value rolls over after it reaches 31.
NOTE: Reads across DWord boundaries are not supported.
x_LVI—Last Valid Index Register (Audio—D30:F2)
I/O Address:
Default Value:
Lockable:
NABMBAR + 05h (PILVI),
NABMBAR + 15h (POLVI),
NABMBAR + 25h (MCLVI)
MBBAR + 45h (MC2LVI)
MBBAR + 55h (PI2LVI)
MBBAR + 65h (SPLVI)
00h
No
Attribute:
Size:
Power Well:
R/W
8 bits
Core
Software can read the registers at offsets 04h, 05h and 06h simultaneously by performing a single,
32-bit read from address offset 04h. Software can also read this register individually by doing a
single, 8-bit read to offset 05h.
Bit
Description
7:5 Hardwired to 0.
4:0
Last Valid Index [4:0] — R/W. This value represents the last valid descriptor in the list. This value is
updated by the software each time it prepares a new buffer and adds it to the list.
NOTE: Reads across DWord boundaries are not supported.
Intel^® I/O Controller Hub 6 (ICH6) Family Datasheet
597