SH7713 Datasheet, PDF (765/904 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 20 Pin Function Controller (PFC)
Initial
Bit Bit Name Value
R/W Description
8

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
7

1
R
Reserved
This bit is always read as 1. The write value should
always be 1.
6

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
5

1
R
Reserved
This bit is always read as 1. The write value should
always be 1.
4

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
3

1
R
Reserved
This bit is always read as 1. The write value should
always be 1.
2

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
1

1
R
Reserved
This bit is always read as 1. The write value should
always be 1.
0

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
Note: * When power-on reset is executed, reserved value is set on these bits.
So rewriting the reserved value is necessary when selecting TEND1/IRQ5/IRQ4.
Rev.1.50 Aug. 30, 2006 Page 725 of 860
REJ09B0288-0150