SH7713 Datasheet, PDF (206/904 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 4 Exception Handling
4.3.2 General Exceptions
CPU address error:
• Conditions
 Instruction is fetched from odd address (4n + 1, 4n + 3)
 Word data is accessed from addresses other than word boundaries (4n + 1, 4n + 3)
 Longword is accessed from addresses other than longword boundaries (4n + 1, 4n + 2,
4n + 3)
 The area ranging from H'80000000 to H'FFFFFFFF in logical space is accessed in user
mode
• Types
Instruction synchronous, re-execution type
• Save address
Instruction fetch: An instruction address to be fetched when an exception occurred
Data access: An instruction address where an exception occurs (a delayed branch instruction
address if an instruction is assigned to a delay slot)
• Exception code
An exception occurred during read: H′0E0
An exception occurred during write: H′100
• Remarks
The logical address (32 bits) that caused the exception is set in TEA.
Illegal general instruction exception:
• Conditions
 When undefined code not in a delay slot is decoded
Delayed branch instructions: JMP, JSR, BRA, BRAF, BSR, BSRF, RTS, RTE, BT/S, BF/S
Note: For details on undefined code, refer to table 2.12 in section 2, CPU. When an undefined
code other than H′FC00 to H′FFFF is decoded, operation cannot be guaranteed.
 When a privileged instruction not in a delay slot is decoded in user mode
Privileged instructions: LDC, STC, RTE, LDTLB, SLEEP; instructions that access GBR
with LDC/STC are not privileged instructions.
Rev.1.50 Aug. 30, 2006 Page 166 of 860
REJ09B0288-0150