SH7713 Datasheet, PDF (365/904 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 11 On-Chip Oscillation Circuits
Initial
Bit
Bit Name Value R/W
Description
7
TME
0
R/W
Timer Enable
Starts and stops timer operation. Clear this bit to 0
when using the WDT in standby mode or when
changing the clock frequency.
0: Timer disabled: Count-up stops and WTCNT value
is retained
1: Timer enabled
6
WT/IT
0
R/W
Timer Mode Select
Selects whether to use the WDT as a watchdog timer
or an interval timer.
0: Use as interval timer
1: Use as watchdog timer
Note: If WT/IT is modified when the WDT is running,
the up-count may not be performed correctly.
5
RSTS
0
R/W
Reset Select
Selects the type of reset when the WTCNT overflows
in watchdog timer mode. In interval timer mode, this
setting is ignored.
0: Power-on reset
1: Manual reset
4
WOVF 0
R/W
Watchdog Timer Overflow
Indicates that the WTCNT has overflowed in
watchdog timer mode. This bit is not set in interval
timer mode.
0: No overflow
1: WTCNT has overflowed in watchdog timer mode
3
IOVF
0
R/W
Interval Timer Overflow
Indicates that the WTCNT has overflowed in interval
timer mode. This bit is not set in watchdog timer
mode.
0: No overflow
1: WTCNT has overflowed in interval timer mode
Rev.1.50 Aug. 30, 2006 Page 325 of 860
REJ09B0288-0150