SH7670 Datasheet, PDF (502/1292 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7670 Series

Section 13 Ethernet Controller Direct Memory Access Controller (E-DMAC)
(a) Receive Descriptor 0 (RD0)
RD0 indicates the receive frame status. The CPU and E-DMAC use RD0 to report the frame
receive status.
Bit: 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RACT RDLE RFP[1:0]
RFE RCSE
RFS[9:0]
Initial Value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
RCS[15:0]
Initial Value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Initial
Bit
Bit Name value R/W Description
31
RACT
0
R/W Receive Descriptor Active
Indicates that this descriptor is active. The E-DMAC
resets this bit after receive data has been transferred
to the receive buffer. On completion of receive frame
processing, the CPU sets this bit to prepare for
reception.
0: The receive descriptor is invalid.
Indicates that the receive buffer is not ready
(access disabled by E-DMAC), or this bit has been
reset by a write-back operation on termination of E-
DMAC frame transfer processing (completion or
suspension of reception).
If this state is recognized in an E-DMAC descriptor
read, the E-DMAC terminates receive processing
and receive operations cannot be continued.
Reception can be restarted by setting RACT to 1
and executing receive initiation.
1: The receive descriptor is valid
Indicates that the receive buffer is ready (access
enabled) and processing for frame transfer from the
FIFO has not been executed, or that frame transfer
is in progress.
When this state is recognized in an E-DMAC
descriptor read, the E-DMAC continues with the
receive operation.
Rev. 1.00 Nov. 14, 2007 Page 476 of 1262
REJ09B0437-0100