SH7616 Datasheet, PDF (197/935 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7600 Series

Section 5 Interrupt Controller (INTC)
5.3.14 Vector Number Setting Register H (VCRH)
Vector number setting register H (VCRH) is a 16-bit read/write register that sets the 16-bit timer
pulse unit 1 (TPU1) TGR1A and TGR1B input capture/compare match interrupt vector numbers
(0–127).
VCRH is initialized to H'0000 by a reset. It is not initialized in standby mode.
Bit:
Initial value:
R/W:
15
14
13
12
11
10
9
8
— TG1AV6 TG1AV5 TG1AV4 TG1AV3 TG1AV2 TG1AV1 TG1AV0
0
0
0
0
0
0
0
0
R
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Bit:
Initial value:
R/W:
7
6
5
4
3
2
1
0
— TG1BV6 TG1BV5 TG1BV4 TG1BV3 TG1BV2 TG1BV1 TG1BV0
0
0
0
0
0
0
0
0
R
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Bits 15 and 7—Reserved: These bits are always read as 0. The write value should always be 0.
Bits 14 to 8—16-Bit Timer pulse unit 1 (TPU1) TGR1A Input Capture/Compare Match Interrupt
Vector Number 6 to 0 (TG1AV6–TG1AV0): These bits set the vector number for the 16-bit timer
pulse unit 1 (TPU1) TGR1A input capture/compare match interrupt. There are seven bits, so the
value can be set between 0 and 127.
Bits 6 to 0—16-Bit Timer pulse unit 1 (TPU1) TGR1B Input Capture/Compare Match Interrupt
Vector Number 6 to 0 (TG1BV6–TG1BV0): These bits set the vector number for the 16-bit timer
pulse unit 1 (TPU1) TGR1B input capture/compare match interrupt. There are seven bits, so the
value can be set between 0 and 127.
Rev. 2.00 Mar 09, 2006 page 171 of 906
REJ09B0292-0200