SH7616 Datasheet, PDF (195/935 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7600 Series

Section 5 Interrupt Controller (INTC)
5.3.12 Vector Number Setting Register F (VCRF)
Vector number setting register F (VCRF) is a 16-bit read/write register that sets the 16-bit timer
pulse unit 0 (TPU0) TGR0C and TGR0D input capture/compare match interrupt vector numbers
(0–127).
VCRF is initialized to H'0000 by a reset. It is not initialized in standby mode.
Bit:
Initial value:
R/W:
15
14
13
12
11
10
9
8
— TG0CV6 TG0CV5 TG0CV4 TG0CV3 TG0CV2 TG0CV1 TG0CV0
0
0
0
0
0
0
0
0
R
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Bit:
Initial value:
R/W:
7
6
5
4
3
2
1
0
— TG0DV6 TG0DV5 TG0DV4 TG0DV3 TG0DV2 TG0DV1 TG0DV0
0
0
0
0
0
0
0
0
R
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Bits 15 and 7—Reserved: These bits are always read as 0. The write value should always be 0.
Bits 14 to 8—16-Bit Timer pulse unit 0 (TPU0) TGR0C Input Capture/Compare Match Interrupt
Vector Number 6 to 0 (TG0CV6–TG0CV0): These bits set the vector number for the 16-bit timer
pulse unit 0 (TPU0) TGR0C input capture/compare match interrupt. There are seven bits, so the
value can be set between 0 and 127.
Bits 6 to 0—16-Bit Timer pulse unit 0 (TPU0) TGR0D Input Capture/Compare Match Interrupt
Vector Number 6 to 0 (TG0DV6–TG0DV0): These bits set the vector number for the 16-bit timer
pulse unit 0 (TPU0) TGR0D input capture/compare match interrupt. There are seven bits, so the
value can be set between 0 and 127.
Rev. 2.00 Mar 09, 2006 page 169 of 906
REJ09B0292-0200