HD6417751 Datasheet, PDF (519/1105 Pages) Renesas Technology Corp – SuperH RISC engine

Bit 7—Transmit Mode (TM): Specifies the bus mode for transfer.
Bit 7: TM
0
1
Description
Cycle steal mode
Burst mode
(Initial value)
Bits 6 to 4—Transmit Size 2 to 0 (TS2–TS0): These bits specify the transfer data size. In access
to external memory, the specification is treated as an access size as described in section 13.3,
Operation. In access to a register, the specification is treated as a register access size.
Bit 6: TS2
0
1
Bit 5: TS1
0
1
0
Bit 4: TS0
0
1
0
1
0
Description
Quadword size (64-bit) specification(Initial value)
Byte size (8-bit) specification
Word size (16-bit) specification
Longword size (32-bit) specification
32-byte block transfer specification
Bit 3—Reserved: This bit is always read as 0, and should only be written with 0.
Bit 2—Interrupt Enable (IE): When this bit is set to 1, an interrupt request (DMTE) is generated
after the number of data transfers specified in DMATCR (when TE = 1).
Bit 2: IE
0
1
Description
Interrupt request not generated after number of transfers specified in
DMATCR
(Initial value)
Interrupt request generated after number of transfers specified in DMATCR
Rev. 3.0, 04/02, page 479 of 1064