HD6417751 Datasheet, PDF (101/1105 Pages) Renesas Technology Corp – SuperH RISC engine

The area from H'F400 0000 to H'F4FF FFFF is used for direct access to the operand cache address
array. For details, see section 4.5.3, OC Address Array.
The area from H'F500 0000 to H'F5FF FFFF is used for direct access to the operand cache data
array. For details, see section 4.5.4, OC Data Array.
The area from H'F600 0000 to H'F6FF FFFF is used for direct access to the unified TLB address
array. For details, see section 3.7.4, UTLB Address Array.
The area from H'F700 0000 to H'F7FF FFFF is used for direct access to unified TLB data arrays 1
and 2. For details, see sections 3.7.5, UTLB Data Array 1, and 3.7.6, UTLB Data Array 2.
The area from H'FC00 0000 to H'FFFF FFFF is the on-chip peripheral module control register
area. For details, see appendix A, Address List.
3.3.2 External Memory Space
The SH7751 Series supports a 29-bit external memory space. The external memory space is
divided into eight areas as shown in figure 3.5. Areas 0 to 6 relate to memory, such as SRAM,
synchronous DRAM, DRAM, and PCMCIA. Area 7 is a reserved area. For details, see section 13,
Bus State Controller (BSC).
H'0000 0000
H'0400 0000
H'0800 0000
H'0C00 0000
H'1000 0000
H'1400 0000
H'1800 0000
H'1C00 0000
H'1FFF FFFF
Area 0
Area 1
Area 2
Area 3
Area 4
Area 5
Area 6
Area 7 (reserved area)
Figure 3.5 External Memory Space
Rev. 3.0, 04/02, page 61 of 1064