SH7040 Datasheet, PDF (678/923 Pages) Renesas Technology Corp – Renesas 32-Bit Single-Chip RISC Microprocessor SuperH RISC engine Family/SH7040 Series(CPU Core SH-2)

• Bits 11 and 10—PE13 Mode 1, 0 (PE13MD1 and PE13MD0): These bits select the function of
the PE13/TIOC4B/MRES pin.
Bit 11:
PE13MD1
0
1
Bit 10:
PE13MD0
0
1
0
1
Description
General input/output (PE13) (initial value)
MTU input capture input/output compare output (TIOC4B)
Manual reset input (MRES)
Reserved
• Bit 9—Reserved: This bit always reads as 0. The write values should always be 0.
• Bit 8—PE12 Mode (PE12MD): Selects the function of the PE12/TIOC4A pin.
Bit 8: PE12MD
0
1
Description
General input/output (PE12) (initial value)
MTU input capture input/output compare output (TIOC4A)
• Bit 7—Reserved: This bit always reads as 0. The write values should always be 0.
• Bit 6—PE11 Mode (PE11MD): Selects the function of the PE11/TIOC3D pin.
Bit 6: PE11MD
0
1
Description
General input/output (PE11) (initial value)
MTU input capture input/output compare output (TIOC3D)
• Bit 5—Reserved: This bit always reads as 0. The write values should always be 0.
• Bit 4—PE10 Mode (PE10MD): Selects the function of the PE10/TIOC3C pin.
Bit 4: PE10MD
0
1
Description
General input/output (PE10) (initial value)
MTU input capture input/output compare output (TIOC3C)
• Bit 3—Reserved: This bit always reads as 0. The write values should always be 0.
640