SH7751 Datasheet, PDF (768/1224 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

15. Serial Communication Interface (SCI)
• In reception, note that if RE is cleared to 0 from 2.5 to 3.5 peripheral operating clock cycles
after the rising edge of the RxD D7 bit SCK input, RDRF will be set to 1 but copying to
SCRDR1 will not be possible.
When Using Synchronous Internal Clock Mode: In reception, note that if RE is cleared to zero
1.5 peripheral operating clock cycles after the rising edge of the RxD D7 bit SCK output, RDRF
will be set to 1 but copying to SCRDR1 will not be possible.
When Using DMAC: When using the DMAC for transmission/reception, make a setting to
suppress output of RXI and TXI interrupt requests to the interrupt controller. Even if a setting is
made to output interrupt requests, interrupt requests to the interrupt controller will be cleared by
the DMAC independently of the interrupt handling program.
Rev.4.00 Oct. 10, 2008 Page 670 of 1122
REJ09B0370-0400