SH7751 Datasheet, PDF (512/1224 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

13. Bus State Controller (BSC)
Address Multiplexing: When area 3 is designated as DRAM interface, address multiplexing is
always performed in accesses to DRAM. This enables DRAM, which requires row and column
address multiplexing, to be connected to this LSI without using an external address multiplexer
circuit. Any of the five multiplexing methods shown below can be selected, by setting bits
AMXEXT and AMX2–0 in MCR. The relationship between the AMXEXT and AMX2–0 bits and
address multiplexing is shown in table 13.14. The address output pins subject to address
multiplexing are A17 to A1. The address signals output by pins A25 to A18 are undefined.
Table 13.14 Relationship between AMXEXT and AMX2–0 Bits and Address Multiplexing
AMXEXT
Setting
AMX2 AMX1
AMX0
Number
of Column
Address
Bits
Output Timing
0
0
0
0
8 bits
Column address
Row address
1
9 bits
Column address
Row address
1
0
10 bits Column address
Row address
1
11 bits Column address
Row address
1
0
0
12 bits Column address
Row address
Other settings
Reserved —
External Address Pins
A1–A13 A14 A15 A16 A17
A1–A13 A14 A15 A16 A17
A9–A21 A22 A23 A24 A25
A1–A13 A14 A15 A16 A17
A10–A22 A23 A24 A25 A17
A1–A13 A14 A15 A16 A17
A11–A23 A24 A25 A16 A17
A1–A13 A14 A15 A16 A17
A12–A24 A25 A15 A16 A17
A1–A13 A14 A15 A16 A17
A13–A25 A14 A15 A16 A17
—
————
Rev.4.00 Oct. 10, 2008 Page 414 of 1122
REJ09B0370-0400