SH7751 Datasheet, PDF (121/1224 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

1. Overview
No. Pin Name I/O Function
Reset
247 VDDQ
Power IO VDD
248 VSSQ
Power IO GND
249 VDD-PLL2 Power PLL2 VDD
250 VSS-PLL2 Power PLL2 GND
251 VDD-PLL1 Power PLL1 VDD
252 VSS-PLL1 Power PLL1 GND
253 VDD-CPG Power CPG VDD
254 VSS-CPG Power CPG GND
255 XTAL
O
Crystal
resonator
256 EXTAL
I
External input
clock/crystal
resonator
Legend:
I:
Input
O: Output
I/O: Input/output
Power: Power supply
SRAM
Memory Interface
DRAM
SDRAM PCMCIA MPX
Notes: Supply power to all power pins. However, on the SH7751 in hardware standby mode,
supply power to RTC at the minimum.
Power must be supplied to VDD-PLL1/2 and VSS-PLL1/2 regardless of whether or not the
on-chip PLL circuits are used.
Power must be supplied to VDD-CPG and VSS-CPG regardless of whether or not the on-
chip crystal oscillation circuit is used.
Power must be supplied to VDD-RTC and VSS-RTC regardless of whether or not the on-
chip RTC is used.
For the handling of the PCI bus pins in PCI-disabled mode, see table D.4 in appendix D.
* I/O attribute is I/O when used as a port.
Rev.4.00 Oct. 10, 2008 Page 23 of 1122
REJ09B0370-0400