SH7751 Datasheet, PDF (5/1224 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

Preface
The SH-4 (SH7751 Group (SH7751, SH7751R)) microprocessor incorporates the 32-bit SH-4
CPU and is also equipped with peripheral functions necessary for configuring a user system.
The SH7751 Group is built in with a variety of peripheral functions such as cache memory,
memory management unit (MMU), interrupt controller, floating-point unit (FPU), timers, two
serial communication interfaces (SCI, SCIF), real-time clock (RTC), user break controller (UBC),
bus state controller (BSC) and PCI controller (PCIC). This series can be used in a wide range of
multimedia equipment. The bus controller is compatible with ROM, SRAM, DRAM, synchronous
DRAM and PCMCIA.
Target Readers: This manual is designed for use by people who design application systems using
the SH7751 or SH7751R.
To use this manual, basic knowledge of electric circuits, logic circuits and microcomputers is
required.
This hardware manual contains revisions related to the addition of R-mask functionality. Be sure
to check the text for the updated content.
Purpose: This manual provides the information of the hardware functions and electrical
characteristics of the SH7751 and SH7751R.
The SH-4 Software Manual contains detailed information of executable instructions. Please read
the Software Manual together with this manual.
How to Use the Book:
• To understand general functions
→ Read the manual from the beginning.
The manual explains the CPU, system control functions, peripheral functions and electrical
characteristics in that order.
• To understanding CPU functions
→ Refer to the separate SH-4 Software Manual.
Explanatory Note: Bit sequence: upper bit at left, and lower bit at right
List of Related Documents: The latest documents are available on our Web site. Please make
sure that you have the latest version.
(http://www.renesas.com/)
Rev.4.00 Oct. 10, 2008 Page v of xcviii
REJ09B0370-0400