SH7211 Datasheet, PDF (997/1228 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family

Section 21 Flash Memory
(a) Select Erasure
In response to the erasure selection command, the boot program transfers the program that
performs erasure, i.e. erases data in the user MAT.
Command H'48
• Command H'48 (1 byte): Selects erasure.
Response
H'06
• Response H'06 (1 byte): Response to selection of erasure
This ACK code is returned after transfer of the program that performs erasure.
Error
response
H'C8
ERROR
• Error response H'C8 (1 byte): Error response to selection of erasure
• ERROR (1 byte): Error code
H'54: Error in selection processing (processing was not completed because of a transfer error.)
(b) Block Erasure
In response to the block erasure command, the boot program erases the data in a specified block of
the user MAT.
Command H'58
Size
Block number
SUM
• Command H'58 (1 byte): Erasure of a block
• Size (1 byte): The number of characters in the block number field (fixed at 1)
• Block number (1 byte): Block number of the block to be erased
• SUM (1 byte): Checksum
Response
H'06
Rev. 2.00 May. 08, 2008 Page 973 of 1200
REJ09B0344-0200