SH7211 Datasheet, PDF (717/1228 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family

Section 15 Serial Communication Interface with FIFO (SCIF)
Initial
Bit
Bit Name Value R/W Description
5, 4
TTRG[1:0] 00
R/W Transmit FIFO Data Trigger
Set the quantity of remaining transmit data which sets
the transmit FIFO data register empty (TDFE) flag in the
serial status register (SCFSR). The TDFE flag is set to 1
when the quantity of transmit data in the transmit FIFO
data register (SCFTDR) becomes less than the set
trigger number shown below.
00: 8 (8)*
01: 4 (12)*
10: 2 (14)*
11: 0 (16)*
Note: * Values in parentheses mean the number of
empty bytes in SCFTDR when the TDFE flag is
set to 1.
3
—
0
R Reserved
This bit is always read as 0. The write value should
always be 0.
2
TFRST
0
R/W Transmit FIFO Data Register Reset
Disables the transmit data in the transmit FIFO data
register and resets the data to the empty state.
0: Reset operation disabled*
1: Reset operation enabled
Note: * Reset operation is executed by a power-on
reset.
1
RFRST
0
R/W Receive FIFO Data Register Reset
Disables the receive data in the receive FIFO data
register and resets the data to the empty state.
0: Reset operation disabled*
1: Reset operation enabled
Note: * Reset operation is executed by a power-on
reset.
0
LOOP
0
R/W Loop-Back Test
Internally connects the transmit output pin (TXD) and
receive input pin (RXD) and internally connects the RTS
pin and CTS pin and enables loop-back testing.
0: Loop back test disabled
1: Loop back test enabled
Rev. 2.00 May. 08, 2008 Page 693 of 1200
REJ09B0344-0200