SH7211 Datasheet, PDF (880/1228 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family

Section 19 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value R/W Description
7
⎯
0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
6 to 4 PD1MD[2:0] 000* R/W PD1 Mode
Select the function of the PD1/D1 pin.
• Area 0: 8-bit mode
000: PD1 I/O (port)
001: D1 I/O (data) (initial value)
010: Setting prohibited
011: Setting prohibited
100: Setting prohibited
101: Setting prohibited
110: Setting prohibited
111: Setting prohibited
3
⎯
0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
2 to 0 PD0MD[2:0] 000* R/W PD0 Mode
Select the function of the PD0/D0 pin.
• Area 0: 8-bit mode
000: PD0 I/O (port)
001: D0 I/O (data) (initial value)
010: Setting prohibited
011: Setting prohibited
100: Setting prohibited
101: Setting prohibited
110: Setting prohibited
111: Setting prohibited
Note: * The initial value depends on the operating mode of the LSI.
Rev. 2.00 May. 08, 2008 Page 856 of 1200
REJ09B0344-0200