SH7211 Datasheet, PDF (38/1228 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family

Section 1 Overview
Classification
A/D converter
(ADC)
Symbol
AVss
AVREFVss
D/A converter DA1, DA0
(DAC)
I/O ports
PA25 to PA0
PB30 to PB0
PD15 to PD0
PF1, PF0
User debugging
interface
(H-UDI)
TCK
TMS
TDI
TDO
TRST
Advanced user AUDATA3 to
debugger (AUD) AUDATA0
AUDCK
AUDSYNC
Emulator
interface
ASEBRKAK
ASEBRK
User break
UBCTRG
controller (UBC)
WAVE interface WSCK
(WAVEIF)
WRXD
WTXD
I/O Name
Function
I
Analog ground Ground pin for the A/D converter.
Connect this pin to the system
power supply (VssQ) when the A/D
converter is not used.
I
Analog reference Reference ground pin for the A/D
ground
converter. Connect this pin to the
system power supply (VssQ) when
the A/D converter is not used.
O Analog output Analog output pins.
pins
I/O General port
26-bit general input/output port pins.
I/O General port
31-bit general input/output port pins.
I/O General port
16-bit general input/output port pins.
I
General port
2-bit general input/output port pins.
I
Test clock
Test-clock input pin.
I
Test mode select Test-mode select signal input pin.
I
Test data input Serial input pin for instructions and
data.
O Test data output Serial output pin for instructions and
data.
I
Test reset
Initialization-signal input pin. Input a
low level when not using the H-UDI.
I/O AUD data
Branch destination/source address
output pin
I/O AUD clock
Sync clock output pin
I/O AUD sync signal Data start-position acknowledge-
signal output pin
O Break mode
acknowledge
Indicates that the E10A-USB
emulator has entered its break
mode.
I
Break request E10A-USB emulator break input pin.
O User break trigger Trigger output pin for UBC condition
output
match.
O Clock output
Interface pin to support Myway Labs
I
Receive data
realtime CPU scope “WAVE^TM”
(WAVE1.0 Level C)
O Transmit data
Rev. 2.00 May. 08, 2008 Page 14 of 1200
REJ09B0344-0200