EFM32WG Datasheet, PDF (702/834 Pages) List of Unclassifed Manufacturers – The EFM32WG Wonder Gecko is the ideal choice for demanding 8-, 16-, and 32-bit energy sensitive applications.

...the world's most energy friendly microcontrollers
28.5.13 ADCn_SCANDATAP - Scan Sequence Result Data Peek Register
Offset
0x030
Bit Position
Reset
Access
Name
Bit
Name
Reset
Access Description
31:0
DATAP
0x00000000
R
Scan Conversion Result Data Peek
The register holds the results from the last scan conversion. Reading this field will not clear SCANDV in ADCn_STATUS or single
DMA request.
28.5.14 ADCn_CAL - Calibration Register
Offset
0x034
Reset
Access
Bit Position
Name
Bit
31
30:24
23
22:16
15
14:8
7
6:0
Name
Reset
Access Description
Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
SCANGAIN
0x3F
RW
Scan Mode Gain Calibration Value
This register contains the gain calibration value used with scan conversions. This field is set to the production gain calibration value
for the 1V25 internal reference during reset, hence the reset value might differ from device to device. The field is unsigned. Higher
values lead to higher ADC results.
Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
SCANOFFSET
0x00
RW
Scan Mode Offset Calibration Value
This register contains the offset calibration value used with scan conversions. This field is set to the production offset calibration
value for the 1V25 internal reference during reset, hence the reset value might differ from device to device. The field is encoded as
a signed 2's complement number. Higher values lead to lower ADC results.
Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
SINGLEGAIN
0x3F
RW
Single Mode Gain Calibration Value
This register contains the gain calibration value used with single conversions. This field is set to the production gain calibration value
for the 1V25 internal reference during reset, hence the reset value might differ from device to device. The field is unsigned. Higher
values lead to higher ADC results.
Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
SINGLEOFFSET
0x00
RW
Single Mode Offset Calibration Value
2013-05-08 - Wonder Gecko Family - d0233_Rev0.50
702
www.energymicro.com