LAN9353 Datasheet, PDF (92/523 Pages) Microchip Technology – Interfaces at up to 200Mbps via Turbo MII

LAN9353
Bits
17
16:13
12
11:3
2:1
0
Description
Power Management Interrupt Event (PME_INT)
This interrupt is issued when a Power Management Event is detected as
configured in the Power Management Control Register (PMT_CTRL). Writ-
ing a '1' clears this bit. In order to clear this bit, all unmasked bits in the
Power Management Control Register (PMT_CTRL) must first be cleared.
Note: The Interrupt De-assertion interval does not apply to the PME
interrupt.
RESERVED
GPIO Interrupt Event (GPIO)
This bit indicates an interrupt event from the General Purpose I/O. The
source of the interrupt can be determined by polling the General Purpose I/
O Interrupt Status and Enable Register (GPIO_INT_STS_EN)
RESERVED
RESERVED
RESERVED
Type
R/WC
RO
RO
RO
RO
RO
Default
0b
-
0b
-
-
-
DS00001925A-page 92
 2015 Microchip Technology Inc.