LAN9353 Datasheet, PDF (315/523 Pages) Microchip Technology – Interfaces at up to 200Mbps via Turbo MII

LAN9353
10.7.3.28 Switch Engine Ingress Rate Command Status Register (SWE_INGRSS_RATE_CMD_STS)
Register #:
184Ch
Size:
This register indicates the current ingress rate command status.
32 bits
Bits
Description
31:1 RESERVED
0
Operation Pending
When set, indicates that the read or write command is taking place. This bit
self-clears once the command has finished.
Type
RO
RO
SC
Default
-
0b
10.7.3.29 Switch Engine Ingress Rate Write Data Register (SWE_INGRSS_RATE_WR_DATA)
Register #:
184Dh
Size:
This register is used to write the ingress rate table registers.
32 bits
Bits
Description
31:16
15:0
RESERVED
Data
This is the data to be written to the ingress rate table registers as specified in
the Switch Engine Ingress Rate Command Register (SWE_IN-
GRSS_RATE_CMD). Refer to INGRESS RATE TABLE REGISTERS on
page 314 for details on these registers.
Type
RO
R/W
Default
-
0000h
10.7.3.30 Switch Engine Ingress Rate Read Data Register (SWE_INGRSS_RATE_RD_DATA)
Register #:
184Eh
Size:
This register is used to read the ingress rate table registers.
32 bits
Bits
Description
31:16
15:0
RESERVED
Data
This is the read data from the ingress rate table registers as specified in the
Switch Engine Ingress Rate Command Register (SWE_IN-
GRSS_RATE_CMD). Refer to INGRESS RATE TABLE REGISTERS on
page 314 for details on these registers.
Type
RO
RO
Default
-
0000h
 2015 Microchip Technology Inc.
DS00001925A-page 315