LAN9353 Datasheet, PDF (235/523 Pages) Microchip Technology – Interfaces at up to 200Mbps via Turbo MII

LAN9353
Bits
Description
0
Port 2 Full-Duplex Manual Flow Control Select (MANUAL_FC_2)
This bit toggles flow control selection between manual and Auto-Negotiation.
Type
R/W
Default
Note 12
0: If Auto-Negotiation is enabled, the Auto-Negotiation function deter-
mines the flow control of switch Port 2 (RX_FC_2 and TX_FC_2 values
ignored). If Auto-Negotiation is disabled, the RX_FC_2 and TX_FC_2
values are used.
1: TX_FC_2 and RX_FC_2 bits determine the flow control of switch Port
2 when in full-duplex mode
Note 9: The default value of this field is determined by the BP_EN_strap_2 configuration strap.
Note 10: The default value of this bit is determined by multiple strap settings.
Note 11: The default value of this field is determined by the FD_FC_strap_2 configuration strap.
Note 12: The default value of this field is determined by the manual_FC_strap_2 configuration strap.
 2015 Microchip Technology Inc.
DS00001925A-page 235