LAN9353 Datasheet, PDF (477/523 Pages) Microchip Technology – Interfaces at up to 200Mbps via Turbo MII

LAN9353
15.8.47 1588 GPIO X RISING EDGE CLOCK SECONDS CAPTURE REGISTER
(1588_GPIO_RE_CLOCK_SEC_CAP_X)
Offset:
Bank:
16Ch
3
Size:
32 bits
This read only register combined with the 1588 GPIO x Rising Edge Clock NanoSeconds Capture Register (1588_G-
PIO_RE_CLOCK_NS_CAP_x) forms the GPIO rising edge timestamp capture.
Note: Values are only valid if the appropriate 1588 GPIO Rising Edge Interrupt (1588_GPIO_RE_INT[7:0]) in the
1588 Interrupt Status Register (1588_INT_STS) indicates that a timestamp is available.
Note:
Unless the corresponding Lock Enable GPIO Rising Edge (LOCK_GPIO_RE) bit is set, a new capture may
occur between reads of this register and the 1588 GPIO x Rising Edge Clock NanoSeconds Capture Reg-
ister (1588_GPIO_RE_CLOCK_NS_CAP_x). Software techniques are required to avoid reading intermedi-
ate values.
Note:
Port and GPIO registers share a common address space. GPIO registers are selected by the Bank Select
(BANK_SEL[2:0] in the 1588 Bank Port GPIO Select Register (1588_BANK_PORT_GPIO_SEL). The GPIO
accessed (“x”) is set by the GPIO Select (GPIO_SEL[2:0]) field.
Note: All 8 GPIO register sets are available.
Bits
Description
31:0 Timestamp Seconds (TS_SEC)
This field contains the seconds portion of the timestamp upon the rising edge
of a GPIO or upon a software commanded manual capture.
Type
RO
Default
00000000h
 2015 Microchip Technology Inc.
DS00001925A-page 477