LAN9353 Datasheet, PDF (79/523 Pages) Microchip Technology – Interfaces at up to 200Mbps via Turbo MII

LAN9353
TABLE 7-2: HARD-STRAP CONFIGURATION STRAP DEFINITIONS (CONTINUED)
Strap Name
rmii_pin_remap_strap
Description
Switch RMII Pin Remapping Mode Strap: Used to remap
the Port 1 pins necessary for RMII modes onto Port 0 pins.
Remapping is selected when P1_INTPHY = 0b.
Note:
Since P1_INTPHY is the Port 1 internal PHY
mode select, RMII remapping mode is selected
when in Port 1 external modes.
The following pins are remapped:
Pins
P1_INTPHY
Normal (was)
P0_IND3
P0_IND2
P0_INCLK
P0_INER
P0_OUTD3
P0_OUTD2
P0_MODE3
P0_COL
P0_CRS
Remapped (becomes)
P1_IND1
P1_IND0
P1_REFCLK
P1_MODE0
P1_INDV
P1_OUTD1
P1_MODE2
P1_OUTD0
P1_MODE1
P1_SPEED
P1_MDIO
P1_DUPLEX
P1_MDC
Note: Pins used for Port 1 mode strapping are also
remapped.
See Note 7-3 and Note 7-4 for the combined Port 1 and Port
0 mode strappings.
Note:
 2015 Microchip Technology Inc.
DS00001925A-page 79