HD64F2145 Datasheet, PDF (822/829 Pages) Renesas Technology Corp – Hitachi 16-Bit Single-Chip Microcomputer

Item
Page Revisions (See Manual for Details)
28.2.2 DC Characteristics 702
Table 28.17 DC
Characteristics (1)
Notes: 4.
P52/SCK0/SCL0, P97/SDA0,
P86/SCK1/SCL1, P42/SCK2/SDA1, and
port G are NMOS push-pull outputs. When
the SCL0, SDA0, SCL1, or SDA1 (ICE = 1)
pin is used as an output, it is NMOS open-
drain output. Therefore, an external pull-up
resistor must be connected in order to
output high level.
P52/SCK0, P97, P86/SCK1, P42/SCK2
(ICE = 0), and port G high levels are driven
by NMOS. When the SCK0, SCK1, or SCK2
pin is used as an output, an external pull-up
resistor must be connected in order to
output high level.
8.
The port A characteristics depend on VCCB,
and the other pins characteristics depend on
VCC in output mode.
Table 28.17 DC
Characteristics (3)
Table 28.17 DC
Characteristics (5)
706, Notes: 4.
707,
711
P52/SCK0/SCL0, P97/SDA0,
P86/SCK1/SCL1, P42/SCK2/SDA1, and
port G are NMOS push-pull outputs. When
the SCL0, SDA0, SCL1, or SDA1 (ICE = 1)
pin is used as an output, it is NMOS open-
drain output. Therefore, an external pull-up
resistor must be connected in order to
output high level.
P52/SCK0, P97, P86/SCK1, P42/SCK2
(ICE = 0), and port G high levels are driven
by NMOS. When the SCK0, SCK1, or SCK2
pin is used as an output, an external pull-up
resistor must be connected in order to
output high level.
28.2.2 DC Characteristics 715 Table name added.
Table 28.17 DC
Characteristics (7) (3-V
Version of H8S/2145BV)
When LPC Function is
Used
28.2.2 DC Characteristics 718 (Error)
(Correction)
Table 28.19 Bus Drive
Characteristics
Item
Max
Input high voltage V_CC + 0.5
Item
Max
Input high voltage 5.5
Rev. 2.0, 08/02, page 782 of 788