HD64F2145 Datasheet, PDF (337/829 Pages) Renesas Technology Corp – Hitachi 16-Bit Single-Chip Microcomputer

Section 13 Timer Connection
This LSI allows interconnection between a 16-bit free-running timer (FRT) and three 8-bit timer
channels (TMR_1, TMR_X, and TMR_Y). This capability can be used to implement complex
functions such as PWM decoding and clamp waveform output.
13.1 Features
• Five input pins and four output pins, all of which can be designated for phase inversion.
Positive logic is assumed for all signals used within the timer connection facility.
• An edge-detection circuit is connected to the input pins, simplifying signal input detection.
• TMR_X can be used for PWM input signal decoding.
• TMR_X can be used for clamp waveform generation.
• An external clock signal divided by TMR_1 can be used as the FRT capture input signal.
• An internal synchronization signal can be generated using the FRT and TMR_Y.
• A signal generated/modified using an input signal and timer connection can be selected and
output.
TIMC0N01_010020020700
Rev. 2.0, 08/02, page 297 of 788