HD64F2145 Datasheet, PDF (819/829 Pages) Renesas Technology Corp – Hitachi 16-Bit Single-Chip Microcomputer

Item
Page Revisions (See Manual for Details)
23.11 Programmer Mode 604 Note amended.
Note:* For 3-V and 5-V version products, set the
programming voltage of the PROM programmer to
3.3V.
Figure 23.13 Memory Map 604
in Programmer Mode
Corrected.
MCU mode
H'000000
H8S/2140B and H8S/2160B
Programmer mode
H'00000
H'00FFFF
On-chip ROM area
H'0FFFF
Undefined value output
H'1FFFF
23.12 Usage Notes
604
Section 24 Masked ROM 607
(Error)
If a voltage higher than the rated voltage is applied, the
product may be fatally damaged. For a 3-V version product,
use a PROM programmer that supports the Hitachi
64/128/256-kbyte flash memory on-chip MCU device at 3.3 V.
Do not set the programmer to HN28F101 or the programming
voltage to 5.0 V. For a 5-V version product, use a PROM
programmer that supports the Hitachi 128-kbyte flash memory
on-chip MCU device at 5.0 V. Do not set the programmer to
HN28F101 or the programming voltage to 3.3 V.
(Correction)
If a voltage higher than the rated voltage is applied, the
product may be fatally damaged. For 3-V and 5-V version
products, use a PROM programmer that supports the Hitachi
64/128/256-kbyte flash memory on-chip MCU device at 3.3 V.
Do not set the programmer to HN28F101 or the programming
voltage to 5.0 V.
Added.
Rev. 2.0, 08/02, page 779 of 788