HD64F2145 Datasheet, PDF (821/829 Pages) Renesas Technology Corp – Hitachi 16-Bit Single-Chip Microcomputer

Item
Page Revisions (See Manual for Details)
28.1.2 DC Characteristics 679,
Table 28.2 DC
680
Characteristics (1)
(Error)
Item
Input high
voltage
P97, P86, P52, P42
(Correction)
Item
Input high
voltage
P97, P86, P52, P42
(Port G is added in the
H8S/2160B and H8S/2161B.)
Output high P97,P86, P52, and P42 *⁴
voltage
Output high P97,P86, P52, and P42 *⁴
voltage
(Port G is added in the
H8S/2160B and H8S/2161B)
Notes:
4.
P52/SCK0/SCL0, P97/SDA0, P86/SCK1/SCL1, P42/SCK2/SDA1,
and port G are NMOS push-pull outputs. When the SCL0,
SDA0, SCL1, or SDA1 (ICE = 1) pin is used as an output, it is
NMOS open-drain output. Therefore an external pull-up resistor
must be connected in order to output high level.
28.1.2 DC Characteristics 683
Table 28.2 DC
Characteristics (3) When
LPC Function is Used
28.1.2 DC Characteristics 685
Table 28.4 Bus Drive
Characteristics
P52/SCK0, P97, P86/SCK1, P42/SCK2 (ICE = 0), and port G high
levels are driven by NMOS. When the SCK0, SCK1 or SCK2 pin is
used as an output, an external pull-up resistor must be connected
in order to output high level.
Table name added.
(Error)
Item
Input high voltage
Max
V + 0.5
CC
(Correction)
Item
Max
Input high voltage 5.5
Tables 28.7 and 28.22
Bus Timing (1) (Normal
Mode)
689,
722
(Error)
Item
Symbol
+:5 delay time 1 t_WRD1
+:5 delay time 2 t_WRD2
+:5 pulse width 1 t_WSW1
+:5 pulse width 2 t_WSW2
(Correction)
Item
+:5, /:5 delay time 1
+:5, /:5 delay time 2
+:5, /:5 pulse width 1
+:5, /:5 pulse width 2
Symbol
t_WRD1
t_WRD2
t_WSW1
t_WSW2
Rev. 2.0, 08/02, page 781 of 788