HD64F2168 Datasheet, PDF (83/874 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer

2.7 Addressing Modes and Effective Address Calculation
The H8S/2000 CPU supports the eight addressing modes listed in table 2.11. Each instruction uses
a subset of these addressing modes.
Arithmetic and logic operations instructions can use the register direct and immediate addressing
modes. Data transfer instructions can use all addressing modes except program-counter relative
and memory indirect. Bit manipulation instructions can use register direct, register indirect, or
absolute addressing mode to specify an operand, and register direct (BSET, BCLR, BNOT, and
BTST instructions) or immediate (3-bit) addressing mode to specify a bit number in the operand.
Table 2.11 Addressing Modes
No. Addressing Mode
1 Register direct
2 Register indirect
3 Register indirect with displacement
4 Register indirect with post-increment
Register indirect with pre-decrement
5 Absolute address
6 Immediate
7 Program-counter relative
8 Memory indirect
Symbol
Rn
@ERn
@(d:16,ERn)/@(d:32,ERn)
@ERn+
@–ERn
@aa:8/@aa:16/@aa:24/@aa:32
#xx:8/#xx:16/#xx:32
@(d:8,PC)/@(d:16,PC)
@@aa:8
2.7.1 Register Direct—Rn
The register field of the instruction code specifies an 8-, 16-, or 32-bit general register which
contains the operand. R0H to R7H and R0L to R7L can be specified as 8-bit registers. R0 to R7
and E0 to E7 can be specified as 16-bit registers. ER0 to ER7 can be specified as 32-bit registers.
Rev. 3.00, 03/04, page 43 of 830