HD64F2168 Datasheet, PDF (824/874 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer

25.2 DC Characteristics
Table 25.2 lists the DC characteristics. Table 25.3 lists the permissible output currents. Table 25.4
lists the bus drive characteristics.
Table 25.2 DC Characteristics (1)
Conditions: VCC = 3.0 V to 3.6 V, AVCC*¹ = 3.0 V to 3.6 V,
AVref*¹ = 3.0 V to AVCC, VSS = AVSS*¹ = 0 V
Item
Schmitt P67 to P60*², EVENT15 to
(1)
trigger ^{EVENT0, (Ex)TMIY, (Ex)TMIX,}
input ^{(Ex)TMI1, (Ex)TMI0,}
voltage
(Ex)IRQ15 to (Ex)IRQ2, IRQ1,
IRQ0, KIN15 to KIN0, WUE15
to WUE8, ETRST,XTAL,
EXCL, ADTRG
SCL5 to SCL0, SDA5 to SDA0
Input RES, STBY, NMI, FWE, MD2, (2)
high MD1 MD0
voltage _EXTAL
Port 7
SCL5 to SCL0, SDA5 to SDA0
CLKRUN, GA20, PME, LSMI,
LSCI, SERIRQ, LAD3 to LAD0,
LPCPD, LCLK,
LRESET,LFRAME
Input pins other than (1) and (2)
above
Input RES, STBY, NMI, FWE, MD2, (3)
low
MD1, MD0
voltage _EXTAL
Port 7
CLKRUN, GA20, PME, LSMI,
LSCI, SERIRQ, LAD3 to LAD0,
LPCPD, LCLK,
LRESET,LFRAME
Input pins other than (1) and (3)
above
Symbol Min.
Typ. Max.
V_T–
VCC × 0.2 
V_T+


V_T+ - V_T– VCC × 0.05 

VCC × 0.7

Test
Unit Conditions
V
V_T–
VCC × 0.3 
V_T+


V_T+ - V_T– VCC × 0.05 
V_IH
VCC × 0.9 

VCC × 0.7

VCC + 0.3
VCC × 0.7  VCC + 0.3
2.2
 AVCC + 0.3

 5.5
VCC × 0.5  VCC + 0.3
2.2
V_IL
–0.3
–0.3
–0.3
–0.3
–0.3
 VCC + 0.3
 VCC × 0.1
 ^{VCC × 0.1}
 ^{VCC × 0.2}
 AVCC × 0.2
 VCC × 0.3
f > 25 MHz
f ≤ 25 MHz
–0.3
 VCC × 0.2
Rev. 3.00, 03/04, page 784 of 830