SH7206 Datasheet, PDF (967/1188 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 19 Pin Function Controller (PFC)
Setting
Port register
Function 1 Function 2 Function 3 Function 4 Function 5 Function 6
PEnMD[2:0] = PEnMD[2:0] = PEnMD[2:0] = PEnMD[2:0] = PEnMD[2:0] = PEnMD[2:0] =
000 (Related 001 (Related 010 (Related 011 (Related 100 (Related 101 (Related
Module)
Module)
Module)
Module)
Module)
Module)
Function 7
Function 8
PEnMD[2:0] =
111 (Related
Module)
E
PECRL1 PE1 I/O (port) TIOC0B I/O TEND0 output 



(MTU2)
(DMAC)
PE0 I/O (port) TIOC0A I/O DREQ0 input 



(MTU2)
(DMAC)
19.3.2 Port F
In port F, the analog input pins of A/D converter and the analog output pins of D/A converter are
multiplexed. Pin functions are automatically changed by the settings of the A/D control register in
A/D converter and D/A control register in D/A converter. (See section 17, A/D Converter (ADC),
and section 18, D/A Converter (DAC).)
Table 19.15 Switching Pin Function of PF6/AN6/DA0 and PF7/AN7/DA1
DACR Setting Value
ADCSR Setting
Value
Pin Function
[DAE, DAOE0, DAE1] CH[2:0] MDS[2] PF6/AN6/DA0 PF7/AN7/DA1 Remarks
(x, 0, 0)
110
x
AN6
PF7
111
0
PF6
AN7
1
AN6
AN7
(0, 1, 0)
110
x
AN6/DA0
PF7
Setting prohibited
111
0
DA0
AN7
1
AN6/DA0
AN7
Setting prohibited
(0, 0, 1)
110
x
AN6
DA1
111
0
PF6
AN7/DA1
Setting prohibited
1
AN6
AN7/DA1
Setting prohibited
(x, 1, 1)/(1, 0, 1)/(1, 1, 0) 110
x
AN6/DA0
DA1
Setting prohibited
111
0
DA0
AN7/DA1
Setting prohibited
1
AN6/DA0
AN7/DA1
Setting prohibited
[Legend]
x:
Don’t care
Note: * Settings marked “setting prohibited” are not allowed because they would result in
simultaneous selection of the A/D and D/A conversion functions for the PF6 or PF7 pin.
Rev. 3.00 Jun. 18, 2008 Page 943 of 1160
REJ09B0191-0300