English
Language : 

SH7206 Datasheet, PDF (1149/1188 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series
Section 25 Electrical Characteristics
25.4.14 AC Characteristics Measurement Conditions
• I/O signal reference level: PVCC/2 (PVCC = 3.0 to 3.6 V, VCC = 1.15 to 1.35 V)
• Input pulse level: PVSS to 3.0 V (where RES, MRES, NMI, MD2, MD0, MD_CLK2,
MD_CLK0, ASEMD, TRST, and Schmitt trigger input pins are within PVSS to PVCC)
• Input rise and fall times: 1 ns
IOL
LSI output pin
CL
DUT output
VREF
IOH
Notes:
1. CL is the total value that includes the capacitance of measurement
tools. Each pin is set as follows:
30pF: CKIO, RASU, RASL, CASU, CASL, CS0 to CS8, and BACK
50pF: All other pins
2. IOL and IOH are shown in table 25.3.
Figure 25.58 Output Load Circuit
Rev. 3.00 Jun. 18, 2008 Page 1125 of 1160
REJ09B0191-0300