SH7206 Datasheet, PDF (728/1188 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 13 Compare Match Timer (CMT)
13.2.3 Compare Match Counter (CMCNT)
CMCNT is a 16-bit register used as an up-counter. When the counter input clock is selected with
bits CKS[1:0] in CMCSR, and the STR bit in CMSTR is set to 1, CMCNT starts counting using
the selected clock. When the value in CMCNT and the value in compare match constant register
(CMCOR) match, CMCNT is cleared to H'0000 and the CMF flag in CMCSR is set to 1.
CMCNT is initialized to H'0000 when the corresponding count start bit for a channel in the
compare match timer start register (CMSTR) is cleared from 1 to 0.
CMCNT is initialized to H'0000 by a power-on reset or in software standby mode, but retains its
previous value in module standby mode.
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
Initial value: 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
13.2.4 Compare Match Constant Register (CMCOR)
CMCOR is a 16-bit register that sets the interval up to a compare match with CMCNT.
CMCOR is initialized to H'FFFF by a power-on reset or in software standby mode, but retains its
previous value in module standby mode.
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
Initial value: 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
R/W: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Rev. 3.00 Jun. 18, 2008 Page 704 of 1160
REJ09B0191-0300