SH7206 Datasheet, PDF (899/1188 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 19 Pin Function Controller (PFC)
Table 19.6 Multiplexed Pins (Port F)
Function 1
Port (Related Module)
Function 2
(Related Module)
Function 3
(Related Module)
F
PF7 input (port)
AN7 input (ADC)
DA1 output (DAC)
PF6 input (port)
AN6 input (ADC)
DA0 output (DAC)
PF5 input (port)
AN5 input (ADC)

PF4 input (port)
AN4 input (ADC)

PF3 input (port)
AN3 input (ADC)

PF2 input (port)
AN2 input (ADC)

PF1 input (port)
AN1 input (ADC)

PF0 input (port)
AN0 input (ADC)

Note: The general input, A/D converter analog input, and D/A converter analog output functions
are automatically switched; the PFC has no register for specifying these functions.
19.1 Features
• By setting the control registers, multiplexed pin functions can be selectable.
• When the general I/O function or TIOC I/O function of MTU2 or MTU2S is specified, the I/O
direction can be selected by I/O register settings.
• Switching the fort F function by the settings of the A/D control/status register of the A/D
converter (ADCSR) or D/A control register of the D/A converter (DACR).
Rev. 3.00 Jun. 18, 2008 Page 875 of 1160
REJ09B0191-0300