SH7206 Datasheet, PDF (192/1188 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 6 User Break Controller (UBC)
Bit
Bit Name
15
SCMFC0
14
SCMFC1
13
SCMFD0
12
SCMFD1
11 to 7 
6
PCB1
Initial
Value
0
0
0
0
All 0
0
R/W Description
R/W C Bus Cycle Condition Match Flag 0
When the C bus cycle condition in the break conditions
set for channel 0 is satisfied, this flag is set to 1. In
order to clear this flag, write 0 to this bit.
0: The C bus cycle condition for channel 0 does not
match
1: The C bus cycle condition for channel 0 matches
R/W C Bus Cycle Condition Match Flag 1
When the C bus cycle condition in the break conditions
set for channel 1 is satisfied, this flag is set to 1. In
order to clear this flag, write 0 to this bit.
0: The C bus cycle condition for channel 1 does not
match
1: The C bus cycle condition for channel 1 matches
R/W I Bus Cycle Condition Match Flag 0
When the I bus cycle condition in the break conditions
set for channel 0 is satisfied, this flag is set to 1. In
order to clear this flag, write 0 to this bit.
0: The I bus cycle condition for channel 0 does not
match
1: The I bus cycle condition for channel 0 matches
R/W I Bus Cycle Condition Match Flag 1
When the I bus cycle condition in the break conditions
set for channel 1 is satisfied, this flag is set to 1. In
order to clear this flag, write 0 to this bit.
0: The I bus cycle condition for channel 1 does not
match
1: The I bus cycle condition for channel 1 matches
R
Reserved
These bits are always read as 0. The write value
should always be 0.
R/W PC Break Select 1
Selects the break timing of the instruction fetch cycle
for channel 1 as before or after instruction execution.
0: PC break of channel 1 is generated before
instruction execution
1: PC break of channel 1 is generated after instruction
execution
Rev. 3.00 Jun. 18, 2008 Page 168 of 1160
REJ09B0191-0300