SH7206 Datasheet, PDF (645/1188 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 10 Multi-Function Timer Pulse Unit 2 (MTU2)
10.7.13 Counter Value during Complementary PWM Mode Stop
When counting operation is suspended with TCNT_3 and TCNT_4 in complementary PWM
mode, TCNT_3 has the timer dead time register (TDDR) value, and TCNT_4 is held at H'0000.
When restarting complementary PWM mode, counting begins automatically from the initialized
state. This explanatory diagram is shown in figure 10.130.
When counting begins in another operating mode, be sure that TCNT_3 and TCNT_4 are set to
the initial values.
TGRA_3
TCDR
TCNT_3
TCNT_4
TDDR
H'0000
Complementary PWM
mode operation
Complementary PWM
mode operation
Counter
Complementary
operation stop PMW restart
Figure 10.130 Counter Value during Complementary PWM Mode Stop
10.7.14 Buffer Operation Setting in Complementary PWM Mode
In complementary PWM mode, conduct rewrites by buffer operation for the PWM cycle setting
register (TGRA_3), timer cycle data register (TCDR), and duty setting registers (TGRB_3,
TGRA_4, and TGRB_4).
In complementary PWM mode, channel 3 and channel 4 buffers operate in accordance with bit
settings BFA and BFB of TMDR_3. When TMDR_3's BFA bit is set to 1, TGRC_3 functions as a
buffer register for TGRA_3. At the same time, TGRC_4 functions as the buffer register for
TGRA_4, and TCBR functions as the TCDR's buffer register.
Rev. 3.00 Jun. 18, 2008 Page 621 of 1160
REJ09B0191-0300