SH7206 Datasheet, PDF (958/1188 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 19 Pin Function Controller (PFC)
(5) Port E Control Register L1 (PECRL1)
Bit: 15
-
Initial value: 0
R/W: R
14 13 12 11
-
PE3MD[1:0]
-
0
0
0
0
R R/W R/W R
10 9
8
7
-
PE2MD[1:0]
-
0
0
0
0
R R/W R/W R
6
5
4
3
-
PE1MD[1:0]
-
0
0
0
0
R R/W R/W R
2
1
0
-
PE0MD[1:0]
0
0
0
R R/W R/W
Bit
15, 14
13, 12
11, 10
9, 8
7, 6
5, 4
Bit Name

Initial
Value
All 0
PE3MD[1:0] 00

All 0
PE2MD[1:0] 00

All 0
PE1MD[1:0] 00
R/W
R
R/W
R
R/W
R
R/W
Description
Reserved
These bits are always read as 0. The write value
should always be 0.
PE3 Mode
Select the function of the PE3/TIOC0D/TEND1 pin.
00: PE3 I/O (port)
01: TIOC0D I/O (MTU2)
10: TEND1 output (DMAC)
11: Setting prohibited
Reserved
These bits are always read as 0. The write value
should always be 0.
PE2 Mode
Select the function of the PE2/TIOC0C/DREQ1 pin.
00: PE2 I/O (port)
01: TIOC0C I/O (MTU2)
10: DREQ1 input (DMAC)
11: Setting prohibited
Reserved
These bits are always read as 0. The write value
should always be 0.
PE1 Mode
Select the function of the PE1/TIOC0B/TEND0 pin.
00: PE1 I/O (port)
01: TIOC0B I/O (MTU2)
10: TEND0 output (DMAC)
11: Setting prohibited
Rev. 3.00 Jun. 18, 2008 Page 934 of 1160
REJ09B0191-0300