SH7206 Datasheet, PDF (720/1188 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 12 Port Output Enable 2 (POE2)
12.4.3 Release from High-Impedance State
High-current pins that have entered high-impedance state due to input-level detection can be
released either by returning them to their initial state with a power-on reset, or by clearing all of
the flags in bits 15 to 12 (POE8F to POE0F) of ICSR1 to ICSR3. However, note that when low-
level sampling is selected by bits 7 to 0 in ICSR1 to ICSR3, just writing 0 to a flag is ignored (the
flag is not cleared); flags can be cleared by writing 0 to it only after a high level is input to one of
the POE0 to POE8 pins and is sampled.
High-current pins that have entered high-impedance state due to output-level detection can be
released either by returning them to their initial state with a power-on reset, or by clearing the flag
in bit 15 (OCF1 and OCF2) in OCSR1 and OCSR2. However, note that just writing 0 to a flag is
ignored (the flag is not cleared); flags can be cleared only after an inactive level is output from the
high-current pins. Inactive-level outputs can be achieved by setting the MTU2 and MTU2S
internal registers.
Rev. 3.00 Jun. 18, 2008 Page 696 of 1160
REJ09B0191-0300