SH7641 Datasheet, PDF (711/1036 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family / SH7641 Series

Section 18 Multi-Function Timer Pulse Unit (MTU)
(18) Operation when Error Occurs during Phase Counting Mode Operation, and Operation
is Restarted in PWM Mode 1
Figure 18.102 shows an explanatory diagram of the case where an error occurs in phase counting
mode and operation is restarted in PWM mode 1 after re-setting.
MTU module
output
TIOC*A
1
2
3
4
5
6
7
8
9
10 11 12 13
RESET TMDR TIOR PFC TSTR Match Error PFC TSTR TMDR TIOR PFC TSTR
(PCM) (1 init (MTU) (1)
occurs (PORT) (0) (PWM1) (1 init (MTU) (1)
0 out)
0 out)
TIOC*B
Port output
• Not initialized (TIOC*B)
TIOC*A/PTE[n]
High-Z
TIOC*B/PTE[n]
High-Z
n = 0 to 15
Figure 18.102 Error Occurrence in Phase Counting Mode, Recovery in PWM Mode 1
1 to 9 are the same as in figure 18.101.
10. Set PWM mode 1.
11. Initialize the pins with TIOR. (In PWM mode 1, the TIOC *B side is not initialized.)
12. Set MTU output with the PFC.
13. Operation is restarted by TSTR.
Rev. 4.00 Sep. 14, 2005 Page 661 of 982
REJ09B0023-0400