SH7641 Datasheet, PDF (547/1036 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH™ RISC engine Family / SH7641 Series

Section 16 I²C Bus Interface 2 (IIC2)
SCL
(Master output)
SDA
(Master output)
SCL
(Slave output)
SDA
(Slave output)
RDRF
ICDRS
ICDRR
User
processing
9
1
2
3
4
5
6
7
8
9
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
A
A
Data 1
Data 2
Data 1
[3] Set ACKBT [3] Read ICDRR [4] Read ICDRR
Figure 16.12 Slave Receive Mode Operation Timing (2)
16.4.6 Clocked Synchronous Serial Format
This module can be operated with the clocked synchronous serial format, by setting the FS bit in
SAR to 1. When the MST bit in ICCR1 is 1, the transfer clock output from SCL is selected. When
MST is 0, the external clock input is selected.
Data Transfer Format:
Figure 16.13 shows the clocked synchronous serial transfer format.
The transfer data is output from the rise to the fall of the SCL clock, and the data at the rising edge
of the SCL clock is guaranteed. The MLS bit in ICMR sets the order of data transfer, in either the
MSB first or LSB first. The output level of SDA can be changed during the transfer wait, by the
SDAO bit in ICCR2.
SCL
SDA
Bit 0 Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7
Figure 16.13 Clocked Synchronous Serial Transfer Format
Rev. 4.00 Sep. 14, 2005 Page 497 of 982
REJ09B0023-0400