D12320VF25IV Datasheet, PDF (704/1304 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 15 Smart Card Interface
Bit 2—Smart Card Data Invert (SINV): Specifies inversion of the data logic level. This
function is used together with the SDIR bit for communication with an inverse convention card.
The SINV bit does not affect the logic level of the parity bit. For parity-related setting procedures,
see section 15.3.4, Register Settings.
Bit 2
SINV
0
1
Description
TDR contents are transmitted as they are
Receive data is stored as it is in RDR
TDR contents are inverted before being transmitted
Receive data is stored in inverted form in RDR
(Initial value)
Bit 1—Reserved: Read-only bit, always read as 1.
Bit 0—Smart Card Interface Mode Select (SMIF): Enables or disables the smart card interface
function.
Bit 0
SMIF
0
1
Description
Smart card interface function is disabled
Smart card interface function is enabled
(Initial value)
Rev.6.00 Sep. 27, 2007 Page 672 of 1268
REJ09B0220-0600