D12320VF25IV Datasheet, PDF (506/1304 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 10 16-Bit Timer Pulse Unit (TPU)
Bit 3—Input Capture/Output Compare Flag D (TGFD): Status flag that indicates the
occurrence of TGRD input capture or compare match in channels 0 and 3.
In channels 1, 2, 4, and 5, bit 3 is reserved. It is always read as 0 and cannot be modified.
Bit 3
TGFD
0
1
Description
[Clearing conditions]
(Initial value)
• When DTC is activated by TGID interrupt while DISEL bit of MRB in DTC is 0
• When 0 is written to TGFD after reading TGFD = 1
[Setting conditions]
• When TCNT = TGRD while TGRD is functioning as output compare register
• When TCNT value is transferred to TGRD by input capture signal while TGRD is
functioning as input capture register
Bit 2—Input Capture/Output Compare Flag C (TGFC): Status flag that indicates the
occurrence of TGRC input capture or compare match in channels 0 and 3.
In channels 1, 2, 4, and 5, bit 2 is reserved. It is always read as 0 and cannot be modified.
Bit 2
TGFC
0
1
Description
[Clearing conditions]
(Initial value)
• When DTC is activated by TGIC interrupt while DISEL bit of MRB in DTC is 0
• When 0 is written to TGFC after reading TGFC = 1
[Setting conditions]
• When TCNT = TGRC while TGRC is functioning as output compare register
• When TCNT value is transferred to TGRC by input capture signal while TGRC is
functioning as input capture register
Rev.6.00 Sep. 27, 2007 Page 474 of 1268
REJ09B0220-0600