D12320VF25IV Datasheet, PDF (489/1304 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 10 16-Bit Timer Pulse Unit (TPU)
10.2.3 Timer I/O Control Registers (TIOR)
Channel 0: TIOR0H
Channel 1: TIOR1
Channel 2: TIOR2
Channel 3: TIOR3H
Channel 4: TIOR4
Channel 5: TIOR5
Bit
:
Initial value :
R/W
:
7
IOB3
0
R/W
6
IOB2
0
R/W
5
IOB1
0
R/W
4
IOB0
0
R/W
3
IOA3
0
R/W
2
IOA2
0
R/W
1
IOA1
0
R/W
0
IOA0
0
R/W
Channel 0: TIOR0L
Channel 3: TIOR3L
Bit
:
Initial value :
R/W
:
7
IOD3
0
R/W
6
IOD2
0
R/W
5
IOD1
0
R/W
4
IOD0
0
R/W
3
IOC3
0
R/W
2
IOC2
0
R/W
1
IOC1
0
R/W
0
IOC0
0
R/W
Note: When TGRC or TGRD is designated for buffer operation, this setting is invalid and the
register operates as a buffer register.
The TIOR registers are 8-bit registers that control the TGR registers. The TPU has eight TIOR
registers, two each for channels 0 and 3, and one each for channels 1, 2, 4, and 5. The TIOR
registers are initialized to H'00 by a reset and in hardware standby mode.
Care is required since TIOR is affected by the TMDR setting. The initial output specified by TIOR
is valid when the counter is stopped (the CST bit in TSTR is cleared to 0). Note also that, in PWM
mode 2, the output at the point at which the counter is cleared to 0 is specified.
Rev.6.00 Sep. 27, 2007 Page 457 of 1268
REJ09B0220-0600