|
EP4SE360F35I4 Datasheet, PDF (236/432 Pages) Altera Corporation – This section provides a complete overview of all features relating to the Stratix IV device family, which is the most architecturlly advanced | |||
|
◁ |
7â12
Chapter 7: External Memory Interfaces in Stratix IV Devices
Memory Interfaces Pin Support
Figure 7â7. Number of DQS/DQ Groups per Bank in EP4SGX70 and EP4SGX110 Devices with 24 Transceivers in the
1152-Pin FineLine BGA Package (1), (2), (3), (4), (5)
DLL0
I/O Bank 8A (3)
40 User I/Os
x4=6
x8/x9=3
x16/x18=1
I/O Bank 8C
24 User I/Os
x4=2
x8/x9=1
x16/x18=0
I/O Bank 7C
24 User I/Os
x4=3
x8/x9=1
x16/x18=0
I/O Bank 7A (3)
40 User I/Os
x4=6
x8/x9=3
x16/x18=1
DLL3
I/O Bank 1A (3)
32 User I/Os
x4=4
x8/x9=2
x16/x18=1
I/O Bank 1C (4)
26 User I/Os (5)
x4=3
x8/x9=1
x16/x18=0
32 User I/Os
x4=4
x8/x9=2
x16/x18=1
I/O Bank 1C (4)
26 User I/Os (5)
x4=3
x8/x9=1
x16/x18=0
EP4SGX70 and EP4SGX110 Devices
in the 1152-Pin FineLine BGA
(with 24 Transceivers)
I/O Bank 6A (3)
32 User I/Os
x4=4
x8/x9=2
x16/x18=1
I/O Bank 6C
26 User I/Os (5)
x4=3
x8/x9=1
x16/x18=0
I/O Bank 6A (3)
32 User I/Os
x4=4
x8/x9=2
x16/x18=1
I/O Bank 6C
26 User I/Os (5)
x4=3
x8/x9=1
x16/x18=0
DLL1
I/O Bank 3A (3)
40 User I/Os
x4=6
x8/x9=3
x16/x18=1
I/O Bank 3C
24 User I/Os
x4=2
x8/x9=1
x16/x18=0
I/O Bank 4C
24 User I/Os
x4=3
x8/x9=1
x16/x18=0
I/O Bank 4A (3)
40 User I/Os
x4=6
x8/x9=3
x16/x18=1
DLL2
Notes to Figure 7â7:
(1) These numbers are preliminary until the devices are available.
(2) EP4SGX70 and EP4SGX110 devices do not support Ã32/Ã36 mode. To interface with a Ã36 QDR II+/QDR II SRAM device, refer to âCombining
Ã16/Ã18 DQS/DQ Groups for a Ã36 QDR II+/QDR II SRAM Interfaceâ on page 7â26.
(3) You can also use DQS/DQSn pins in some of the Ã4 groups as RUP and RDN pins, but you cannot use a Ã4 group for memory interfaces if two pins
of the Ã4 group are used as RUP and RDN pins for OCT calibration. If two pins of a Ã4 group are used as RUP and RDN pins for OCT calibration, you
can use the Ã16/Ã18 or Ã32/Ã36 groups that include that Ã4 group; however, there are restrictions on using Ã8/Ã9 groups that include that Ã4
group.
(4) All I/O pin counts include dedicated clock inputs that you can use for data inputs.
(5) You can also use some of the DQS/DQ pins in I/O Bank 1C as configuration pins. You cannot use a Ã4 DQS/DQ group with any of its pin members
used for configuration purposes. Ensure that the DQS/DQ groups that you have chosen are not also used for configuration because you may lose
up to four Ã4 DQS/DQ groups, depending on your configuration scheme.
Stratix IV Device Handbook
Volume 1
February 2011 Altera Corporation
|
▷ |